CLT multi-family residential building

Multi-family residential building with n. 8 lodgings, arranged on three levels above ground and a basement level used as a garage. The above-ground structure was build with CLT panels for walls and floors and with glulam timber beams and HEB steel beams.
Site of construction: Ischia di Pergine, Trento (TN)

Structural designer: Dr. Ing. Rossano Stefani
Architectural designer: Arch. Aldo Tomaselli
Construction company: Domus Immobiliare S.r.l.

Five floors residential buildings with framed walls

 

Residential building complex commissioned by ATER Trieste consisting of 5 buildings. Each building has 5 floors above ground plus the pitched attic floor. The walls are made with timer frames, while the floors are in CLT, including the ramps and the stairways, with the exception of the roof which is made of joists. The terraces are partially supported by steel structures.

Structural designers of the wooden structures: Ing. Sandro Rossi – Ing. Raffaele Cruciani, Ascoli Piceno, Italy

studioing-cru.ro@libero

14/01/2019 – Ver. 70-71 – Import .dxf optimisation options, Move and snap feature, improvement in the management of portable licences with the machine name identification

In the latest version of the software we have added the following new features:

  • Optimization options for the import of .dxf drawings: it is now possible to enable the following options:
    • – Merge close points (2D/3D): it allows to merge the points (even belonging to lines) whose mutual distance is lower than the user-defined threshold;
    • – Snap to grid (2D): it allows to adapt the imported lines and points to a grid whose dimension is user-defined;
    • – Snap to existing points (2D): it allows to adapt the imported lines and points to the pre-existing elements of the model by taking as reference their nodes.
  • Move and snap feature: it is now possible to move points and lines and adapt them to the pre-existing elements in the model. This feature is useful when the user wants to import the drawings of the plans of each level of the structure and adapt them to the already modelled elements.
  • Identification of the machine name for the management of portable licences: it is now possible to assign a name to each machine that uses the software in order to know always which is the machine to which the licence is assigned. This is useful when the software indicates that the licence is already assigned to another machine since the user will also be notified of the name of that machine.
  • Bug fixing and small improvements

Note: the release licence button and the section for the assignment of the machine name has been moved to the “Settings…” section that can be reached from the Welcome page of the software.